TubeWorks Change Log

1.0
  • 5 years ago Add Import STEP / IGS
  • 5 years ago Add Extract LRA Semi-Automatically
  • 5 years ago Add Export bend data as PDF
2.0 “Fully Automatic Process” (Scheduled Feature)
  • 5 years ago Add As soon as the part is opened, Bend Data is automatically populated and there is no need for interacting with the model.
2.1 “Extend an End Straight” (Requested by 5 Customers)
  • 5 years ago Add If the tube is end formed (flared, expanded, reduced, …), the centreline end points can be extended to satisfy this condition.
3.0
  • 4 years ago Add Export bend data as machine file.
  • 4 years ago Add Create Tube Using XYZ / LRA.
4.0
  • 3 years ago Add Unbend Tube.
  • 3 years ago Add Export Unbent Tube as STEP / IGS for Laser / Plasma Cutter.
TubeWorks 2020 Released
  • 2 years ago Add TubeWorks Viewer + Lite + Full converted into one product.
  • 2 years ago Add Stop Locations for manual machines.
  • 2 years ago Add Absolute rotation calculations.
  • 2 years ago Add Tooling log.
  • 2 years ago Add Calibrate tooling.
  • 2 years ago Add Stretch compensation.
  • 2 years ago Add Overbend calculations.
  • 2 years ago Add Bend on bend support.
  • 2 years ago Add Export PDF of stop locations.
TubeWorks 2021 Released
  • 1 year ago Add Structural module integrated into TWSA.
  • 1 year ago Add Direct link created to push bend data from structural into the model tab.
  • 1 year ago Add Real radius calculation in the tooling log
  • 1 year ago Add Real radius compensation on machine file export.
  • 1 year ago Add Network licensing capability.
TubeWorks Structural Module Released
  • 4 years ago Add Import Handrail models from SDS/2 and Tekla.
  • 4 years ago Add Auto extract Bend Data.
  • 4 years ago Add Extend end Straights.
  • 4 years ago Add Change Bend Radii.
  • 4 years ago Add Export bend data as PDF.
  • 4 years ago Add Export machine file.
TubeWorks Viewer Module Released
  • 3 years ago Add Import STEP/ IGS files.
  • 3 years ago Add Measurement Tools.
  • 3 years ago Add Export Tube dimensions as PDF.
  • 3 years ago Add DWG / DXF Import and Save as PDF.
TubeWorks Simulation Module Released
  • 3 years ago Add Export machines from CAD model directly into Sim platform.
  • 3 years ago Add Generic tool creator.
  • 3 years ago Add Import machine file.
  • 3 years ago Add Simulate rotary draw + push bending.
  • 3 years ago Add Animation + Collision Detection Mode.
  • 3 years ago Add Ability to modify bend data to avoid collision (reverse rotation / bend Sequence…).
TubeWorks Freeform Module Released
  • 1 year ago Add Create centreline in freeform geometry.
  • 1 year ago Add Smoothing functionality.
  • 1 year ago Add Split and for lines / arcs.
  • 1 year ago Add Auto split freeform curves to lines / arcs.
  • 1 year ago Add Generate machine file.
  • 1 year ago Add Export smooth curves as step/ igs.
  • 1 year ago Add Export auto-splitted centreline as step / igs.
  • 1 year ago Add Compare two curves and generate deviation chart.
  • 1 year ago Add Auto align algorithm for two curves.
TubeWorks CMM Module Released
  • 1 year ago Add Scan tube directly using Romer absolute arm with rs5/rs6 scanner.
  • 1 year ago Add Ability to open point cloud files.
  • 1 year ago Add Automatically generate centreline and smoothen in point cloud (round profile).
  • 1 year ago Add Compare as freeform deviation or lra with master data (round profile).
  • 1 year ago Add Export lra deviation as machine file (corrected values and deviation only).